Product Details of Hardline Seamless 565 Trunk Cable
The Hardline Seamless 565 Trunk Cable is a specific and high-performance type of coaxial cable used in critical infrastructure. The designation "565" provides a key piece of information about its size.
Features
1.Seamless Tubular Outer Conductor:The outer conductor is a perfectly smooth, seam-free tube, typically made of aluminum.This eliminates any potential points of weakness, signal leakage, or moisture ingress. It provides 100% shielding effectiveness,A crucial advantage over corrugated or braided cable.
2.Center Conductor:Material is solid copper clad aluminum. This ensures the lowest possible electrical resistance and signal loss. It is held precisely in the center of the cable by foamed Polyethylene.
3. Dielectric: Physically foamed polyethylene
4.Outer Jacket: Black PE (Polyethylene) .This jacket protects the outer conductor from physical damage, corrosion and UV radiation for aerial installations.
5.Impedance: Almost 75 Ohms is standard for CATV/broadcast.
6.Larger Diameter: The increased size of 0.656 inch cable compared to a 0.500 inch cable allows for larger internal components.
Advantages
1.The Lower Signal Loss (Attenuation) in its Class:
This is the single greatest advantage. The combination of the larger diameter and PE
dielectric offers superior attenuation performance. This allows signals to travel much farther between amplifiers, which:
a.Reduces the number of amplifiers needed in a system, lowering overall system noise, cost, and points of failure.
b.Improves signal quality and data rates at the receiving end, which is critical for high-bandwidth 5G and LTE networks.
2. Perfect Shielding and Immunity:
The seamless tubular outer conductor acts as a perfect Faraday cage. It provides complete immunity to external electromagnetic interference (EMI) and prevents any signal from leaking out. This is vital for maintaining signal integrity in dense RF environments and for meeting strict regulatory limits on signal leakage.
3. Environmental Robustness and Longevity:
The seamless outer conductor is inherently waterproof and gas-tight, preventing moisture
from ever entering the dielectric space.This makes the cable incredibly durable and suitable
for decades of long service in a difficult environment.
4.This larger size directly translates to superior electrical performance compared to a 500 trunk cable
Same series of products








ffffffffff
Hardline Seamless 565 Trunk Cable
Material Specification:
| Items | Material | Diameter (mm) |
| Inner Conductorl | Copper Clad Aluminuml |
3.28±0.03 |
| Dielectricl | Physical Foam polyethylenel |
13.18±0.10 |
| Outer Conductorl | Overlapping Copper Foill |
14.35±0.10 |
| Jacketl | Black PEl |
15.88±0.20 |
Electrical Performance:
| Impedance | 75±2Ω | |
| Capacitance | 50.20 PF/m | |
| Velocity | 87% | |
| DC Resistance Max@20℃ |
Inner Conductor Outer Conductor |
3.31Ω/km 1.18Ω/km 4.49Ω/km |
| SRL Min / VSWR Max | 5-1002 MHz | 30dB / 1.06 |
| SRL Min / VSWR Max | 1002-1218 MHz | 24dB / 1.13 |
| SRL Min / VSWR Max | 1218-1794 MHz | 20dB / 1.22 |
| SRL Min / VSWR Max | 1794-2250 MHz | 20dB / 1.22 |
| SRL Min / VSWR Max | 1218-1794 MHz | 20dB / 1.22 |
Mechanical Specification:
| Jacket Tensile | ≥10.3MPa |
| Jacket Elongation | ≥400% |
| Min.Bending Radius |
127.00mm |
Environmental Specification:
| Installation Temperature | -40℃~+60℃(PE) |
| Operating Temperature | -55℃~+85℃(PE) |
Attenuation at 20℃ cable temperature:
| Frequency (MHz) | Attenuation Typical (dB/100m) |
| 5 | 0.46 |
| 55 | 1.54 |
| 211 | 3.12 |
| 250 | 3.38 |
| 270 | 3.51 |
| 300 | 3.7 |
| 330 | 3.91 |
| 350 | 4.03 |
| 400 | 4.33 |
| 450 | 4.59 |
| 500 | 4.89 |
| 550 | 5.12 |
| 600 | 5.38 |
| 750 | 6.07 |
| 870 | 6.59 |
| 1002 | 7.12 |
| 1218 | 7.94 |
| 1500 | 8.92 |
| 1794 | 9.87 |
| 1800 | 9.89 |
| 2000 | 10.5 |
| 2200 | 11.09 |
| 2500 | 11.93 |
| 2700 | 12.48 |
| 3000 | 13.26 |
*The attenuation is typical value, Maximum value shall be 105% of the nominal attenuation value.
Question: What is a Hardline Seamless Trunk 565 Cable?
Answer:
This is a premium, rigid coaxial cable designed for the core backbone ("trunk") of large-scale signal
distribution systems.
1. Hardline: Indicates it is a rigid, non-flexible cable with a smooth, tubular outer conductor, as opposed
to a flexible cable with a braided shield.
2. Seamless: This is a critical feature. It means the outer conductor is formed from a seamless copper or
aluminum tube.
3. Trunk: Denotes its use in the main arterial network of a system.
4. 565: This is the most important spec. It refers to the 0.565 inch (approx. 14.35 mm) outer diameter.
This larger size directly translates to superior electrical performance compared to a 0.500 inch cable.
Hot Tags: hardline seamless trunk cable 565, China hardline seamless trunk cable 565 manufacturers, suppliers, factory, CAT V Wire, Hardline Seamless Trunk Cable 700, Welded Trunk Cable, 1 foot coaxial cable, white coaxial cable, CATV Coax Cable




