Product Details of 8D-FB Coaxial Cable
The 8D-FB coaxial cable represents a significant step up in performance from the 3D, 4D, and 5D-FB cables, positioning it for more demanding applications where lower signal loss over longer distances is required.
The 8D-FB coaxial cable is a high-performance,low-loss 50-ohm cable designed for demanding RF infrastructure. Its primary advantages are its very low signal attenuation and high power handling, making it an excellent choice for medium-to-long distance feeder applications in cellular, broadcast, and critical communication systems where the superior performance of rigid 1/2" cable is not required, but the performance of smaller cables is not insufficient.
Features
1.Impedance: 50 ohms. Standard for professional radio frequency (RF) applications.
2.Center Conductor: Typically made of bare copper or copper-clad aluminum (CCA), with a larger diameter (e.g., ~2.80 mm) to reduce resistive losses.3. Dielectric: Foamed Polyethylene (FPE) with the FB structure. The large ~8.0 mm diameter, filled with air cells, is the key to its low signal loss.
3.Dielectric: Foamed Polyethylene (FPE) with the FB structure. The large ~8.0 mm diameter, filled with air cells, is the key to its low signal loss.
4.Shielding: It almost always features high-performance double shielding:
a.First Layer: An Aluminum-Polyester Tape (APT) or bonded aluminum tape, providing 100% coverage.
b.Second Layer: A high-density tinned copper braid (e.g., 80%~95% coverage).
c.This offers exceptional protection against electromagnetic interference (EMI).
5. Outer Jacket: Made of UV-resistant Polyethylene (PE) for outdoor durability or PVC/LSZH for indoor use. The total cable diameter is typically around 10.60 mm.
Advantages
1. Very Low Signal Loss (Attenuation):
· This is the most significant advantage. The large, foamed dielectric dramatically reduces signal loss compared to all smaller "D" series cables.
· Why it matters: It is ideal for medium-to-long feeder runs where maintaining signal strength is critical. This translates to better system efficiency, broader coverage, and the potential for using lower-power transmitters.
2. High Power Handling Capacity:
· The larger center conductor and dielectric allow the 8D-FB cable to handle significantly more RF power than 5D-FB or 4D-FB cables without overheating or degrading.
· Why it matters: Suitable for high-power transmission sites, such as FM radio broadcast transmitters and high-power cellular base stations.
3. Excellent Shielding Effectiveness:
· The robust double shielding (foil + high-density braid) ensures minimal signal leakage and superior immunity to external noise. This results in a cleaner signal and more reliable communication links.
4. Environmental Durability:
· The PE jacket is designed to withstand harsh weather conditions, moisture, and UV radiation. The FB dielectric's closed-cell structure also resists moisture absorption over time, which is crucial for maintaining performance in outdoor installations.
5. Mechanical Robustness:
· While larger and stiffer than 5D-FB, it is designed to withstand the physical stresses of installation and long-term use on towers or in conduits. Some versions may also be "corrugated copper" cables, which are even more robust but less flexible.
Applications
The 8D-FB cable is used in professional and carrier-grade applications that demand a balance of performance and practical handling:
· Macro Cell Base Stations: As the main feeder cable running up the tower to the antennas.
· Broadcast Systems: For connecting FM and VHF TV transmitters to their antennas.
· Land Mobile Radio (LMR) Repeater Sites: Providing coverage for public safety and commercial two-way radio systems.
· Microwave Communication Links: As a jumper or short feeder cable.
Same series of products








Specification of 8D-FB coaxial cable
Material Specification:
|
Items |
Material |
Diameter (mm) |
|
Inner Conductor |
Bare Copper or CCA |
2.80±0.05 |
|
Dielectric |
Physical Foam polyethylene |
7.80±0.20 |
|
Outer Conductor |
Bonded Aluminum Foil |
8.00±0.20 |
|
Tinned Copper or AL Alloy |
80%⁓95% Coverage |
|
|
Jacket |
PVC or PE or LSZH |
10.60±0.30 |
Electrical Performance:
|
Impedance |
50±2Q |
|
Capacitance |
82.30 PF/m |
|
Velocity |
83% |
|
Cut-off Frequency |
15.10GHz |
|
Insulation Resistance |
≥5000 MQ•km |
|
VSWR |
30-1000 MHz |
≤1.15 |
|
VSWR |
1000-2000 MHz |
≤1.18 |
|
VSWR |
2000-3000 MHz |
≤1.20 |
Mechanical Specification:
|
Minimum Bending Radius |
55.00mm |
Environmental Specification:
|
Installation Temperature |
-40℃~+85℃(PE); -25℃~+70℃(LSZH or PVC) |
|
Operating Temperature |
-40℃~+85℃(PE); -25℃~+70℃(LSZH or PVC) |
Attenuation at 20℃ cable temperature:
|
Frequency (MHz) |
Attenuation Typical (dB/100m) |
|
150 |
5.20 |
|
200 |
6.10 |
|
280 |
7.30 |
|
350 |
8.20 |
|
400 |
8.60 |
|
800 |
12.30 |
|
900 |
13.00 |
|
1200 |
16.50 |
|
1500 |
18.70 |
|
1800 |
20.90 |
|
1900 |
21.70 |
|
2000 |
22.50 |
|
2400 |
24.80 |
|
2500 |
25.50 |
|
3000 |
28.40 |
*The attenuation is typical value, Maximum value shall be 105% of the nominal attenuation value.
Q: What Does "8D-FB" Mean?
A: 8D: This refers to the approximate diameter of the dielectric (the foam insulator) in millimeters. This larger size is the primary reason for its superior performance compared to smaller "D" cables.
FB (Foam Skin-Bone): This is the advanced foaming process that creates a closed-cell polyethylene dielectric with solid inner and outer "skin" layers and a rigid "bone" structure in between. This technology ensures mechanical stability and excellent electrical properties.
Hot Tags: 8d-fb coaxial cable, China 8d-fb coaxial cable manufacturers, suppliers, factory, RG 213 Coaxial Cable, 30 ft coaxial cable, LQ 900 Coaxial Cable, 50 ft coaxial cable, rg7 coaxial cable, LQ 600 Coaxial Cable


